tag heuer calibre 5 winds clockwise or counterclockwise

You can recharge it by turning the crown clockwise, unscrewed or in neutral position, (minimum 40 times). “As it is the action of the wearer’s wrist that winds up the movement and maintains maximum power, the power reserve will begin to drain if there is not enough movement, causing the watch to stop.

You can manually wind it if you want to be sure the power reserve is full. Its the cheapest and most worthwhile thing you can ever do to a dive watch, and if you keep that up along with a reasonable service schedule your Aquaracer will be in fine condition decades and decades from now.Click to expand.You can read in the previous post by Hubert that mechanical watches are not so precise as quartz watches, but your Calibre 5 should be within the -5/+20 seconds per day margin, and your is -15 seconds per day = not normal Whether its a $200 Seiko, a several thousand dollar Aquaracer Automatic, a Rolex Submariner, or a $26k Patek Philippe Nautilus, a set of tiny rubber seals is the critical factor and they need to be changed every 2-3 years and re-pressure tested to maintain water resistance. Oh and lastly, don't ever forget that your Aquaracer, like all water resistant watches is dependent entirely on those seals for water resistance. Incidentally while its not recommended, and you should definitely screw down any crown that is capable of being screwed down, nearly all of them are still water resistant even when they are in the crown out position as the stem seal still keeps water out if its in good condition. As Dave suggests its not the actual tightening down of the thread that provides the water resistance, its the multiple rubber seals themselves within the crown and stem, for that reason screwing it in doesn't require force or tightness.

Tag heuer calibre 5 winds clockwise or counterclockwise